Agricultural Gearbox
The agricultural gearbox is the primary mechanical element of the kinematic chain of agricultural machines. It is normally driven by the tractor power take-off via the PTO shaft and the gearbox drives. The gearbox for agricultural machinery operating torque can also be transmitted to the gearbox by hydraulic motors or belt pulleys, in addition to chain gears.
Agricultural gearboxes always have a single input shaft and at least one particular output shaft. If these shafts sit at 90° to one another, the gearbox can be an ORTHOGONAL ANGLE gearbox or even more commonly called a right-angle gearbox.

rotary tiller gearbox is definitely adopted middle equipment transmission system, mounted with the tractor of 12-80HP. Tractor wheel tracks are totally covered after tillage as the functioning width is a lot wider. The quality is reliable and the overall performance is well. So that it can be utilized on dried out and paddy field. It can decrease the time, laboring, and price, etc. during operation

Increasers and Reducers
When the gearboxes have both gears with different amounts of teeth.
The gearbox is a reducer when the driving gear, i.e. the main one with the input shaft, gets the fewer amount of teeth (pinion), therefore the result shaft rotates slower compared to the input shaft.
It is named an increaser when the input shaft is mounted on the apparatus with the larger amount of teeth (crown), hence the output shaft rotates faster than the input shaft.
Right-angle gearboxes, distributors or rotational invert gearboxes
When the gearboxes have gears with the same number of the teeth.
The gearbox is known as right-angle when it only has two shafts (input and output),
whereas it really is called a distributor when there are at least two output shafts.
It really is called a rotational invert gearbox and parallel offset in the versions with parallel shafts with two gearboxes.

Speed change
in addition to the main couple of gears and relevant shafts, the gearboxes may also have other gears with a different amount of teeth. The gear shift of the main couple of gears with the secondary types enables different speeds. The manual switch of the secondary equipment pair with gears with different quantity of teeth allows adjustments to the result rotation speed.
CMR GROUP has the capacity to design and produce also agricultural machinery applications.