DUMP TRAILER Power UNIT-DOUBLE ACTING
This energy unit includes a power up power down circuit with load holding on each A & B ports. A stress compensatred flow control could be extra to circuit to control the decent pace in the cylinder.
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean all the hydraulic parts concerned just before set up of the power unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst, which should really also be clean and no cost of impurities. N46 hydraulic oil is proposed.
four. The power unit must be mounted horizontally.
5. Check the oil level from the tank immediately after the initial working of your power unit.
6. Oil shifting is needed immediately after the preliminary 100 operation hours, afterwards when just about every 3000 hrs.
DUMP TRAILER Electrical power UNIT- SINGLE ACTING
This electrical power unit has a electrical power up gravity down circuit. Get started the motor to lengthen the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve can be offered if demanded. Also a stress compen sated flow control could be extra to the circuit to regulate the descent speed in the cylinder.
Remark: Please talk to our income engineer for your distinct pump displacement, motor power or tank capacity.
one. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all of the hydraulic components concerned prior to set up of the electrical power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst,which should really also be clean and no cost of impurities.N46 hydraulic oil is recommended.
4. The power unit should be mounted horizontally.
five. Check the oil degree from the tank right after the initial running on the power unit.
6. Oil modifying is required after the preliminary a hundred operation hrs, afterwards as soon as each and every 3000 hrs.