TF Style Flanges
Model TF flanges are created from precisely the same high-strength cast iron as the S flanges, but are built to accommodate the worldwide normal Taper Lock bushing for easy set up and removal
TF Style flanges make it possible for for mounting the bushing on the front (hub) side from the flange
TF flanges can be found in sizes six by sixteen and can be employed with any type of sleeve as pictured on page SF-5
TR Variety Flanges
TR flanges are similar on the TF type, but allow for that Taper Lock Bushing to get mounted and eliminated from
the reverse or serration side of the flange
The limited torque ratings on the Taper Lock Bushings permit TR flanges to only be employed with EPDM or Neoprene sleeves
Diverse bushing sizes are employed, so they’ve got different maximum bores than the TF flanges
Sizes 6 by way of 16 can be found
Taper-Lock Bushings
The business common taper lock bushing is really a split style enabling a compression match with the flange towards the shaft with out set screws
The easy design tends to make the set up and elimination quick even though the 8° taper grips tight and provides great concentricity
A Reduced level of inventory can be accomplished due to the numerous other energy transmission components that use Taper Lock Bushings such as: sheaves, sprockets, and pulleys
will not provide 
the Taper-Lock Bushings themselves as these are extensively offered from other manufacturers
T Form Flanges For Use With Taper-Lock Bushings
Tags: