Consisting of the stress balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this electrical power unit is created to operate materials handling products. The decreasing motion is achived by the solenoid valve together with the reducing velocity controlled by an adjustable needle valve. The left and proper functions are equipped by using a dual pilot operated check out valve and cross-over relief valves.
Remark: Please talk to our revenue engineer for your diverse pump displacement, motor electrical power or tank capability.
1. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
two. Clean each of the hydraulic components concerned in advance of installation of the power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst, which should really also be clean and absolutely free of impurities.N46 hydraulic oil is proposed.
4. This electrical power unit really should be mounted horizontal.
five. Check the oil level in the tank just after the initial start out on the power unit.
six. Oil transforming is required just after the initial 100 operation hours, afterwards the moment every 3000 hrs.
SNOW PLOW Electrical power UNIT