Slewing bearings comprise an inner ring and an external ring, one of which often incorporates a gear. Together with attachment holes in both bands, they permit an optimized power tranny with a simple and quick connection between adjacent machine ingredients. The Shaft Clamp china bearing raceways, in conjunction with the rolling factors and cages or spacers, are designed to accommodate loads acting singly or in combination, and in any direction.
Selecting the appropriate slewing bearing can be a challenge, especially if there will be stringent technical, reliability or economic demands. In these cases, for instance, EPT application engineering assistance can provide advanced calculations and simulations making use of state-of-the-art analyse solutions to optimize and validate the best design to satisfy the customer requirements.
EPT also offers worldwide a wide variety of added value companies for slewing bearings, including remanufacturing. A slewing bearing with simply 30% left of its calculated service life can be well worth remanufacturing. EPT’s standardized remanufacturing procedures can extend drastically the service life of critical equipment.
All of these incorporate to boost rotating equipment overall performance and reduce total cost of ownership.
1. We can supply several size slewing band bearings.
2. Type: Non-teeth, interior teeth, external teeth
4. Diameter range: 200—–6500mm
5. Design and produce according to customer requires, OEM bearing.
6. Top quality bearing, competitive value, prompt delivery and greatest services.
7. Welcome to Other personalized bearings, miniature bearings, auto bearings, excavator and crane bearings and so forth.
The slewing bearing (slewing bearing) has been coated with anti-rust oil prior to departing the factory and wrapped with film and linen. The rust-proof amount of this package is normally 3-6 several weeks. The storage temperature should be 20±10°C, and the relative humidity is not more than 60%. After the expiration date, it ought to be maintained with time. The slewing bearing share should be filled up with grease after twelve months and check the overall flexibility of its rotation.
The slewing bearing (slewing bearing) is usually fixed upon the pallet or in the package when it leaves the factory. It really is available in single-part packaging and group packaging. Transportation and storage should be kept level, can not be collided and squeezed, can not be rained, and the storage area ought to be flat. There should be a flat separation between your stacked slewing bearings. The slewing bearing generally has a lifting hole, which may be screwed in to the eyebolt for safe lifting.
Our four point speak to ball slewing bearing comprises of two seat bands. In this slewing bearing, the balls connection with the circular raceway at four tips. The bearing can support axial power, radial drive and resultant moment at the same time.
The contact ball slewing bearings are compact in design and lumination in weight. They might be applied in slewing conveyors, welding manipulators, middle or tiny sized cranes and excavators, etc.
A slewing bearing or slew[ing] band is a rotational rolling-element bearing or ordinary bearing that typically supports much but slow-turning or slow-oscillating load, often a horizontal platform like a conventional crane, a swing yarder, or the wind-facing program of a horizontal-axis windmill. (To “slew” methods to turn without modify of place.)