The Ever-Electricity is a battle-tested modular planetary gearbox system designed specifically for use in the Robotics market. Designers choose one of four outcome shafts, planetary gear box configure a single-stage planetary using one of six diverse reductions, or build a multi-level gearbox using any of different ratio combinations.
Each of the Ever-Electrical power gearboxes include installation plates & hardware for typical Robotics Competition motors (550, 775 Series, 9015 size motors) — these plates are custom suitable for each motor to provide perfect piloting and excessive efficiency.
What good is a versatile system if it’s not easy to take apart and re-configure? That’s why we unveiled the Ever-Electric power with assembly screws in the rear of the gearbox. This makes it easy to change equipment ratios, encoders, motors, etc. without need to take apart your complete mechanism. Another characteristic of the Ever-Power that makes it easy to use may be the detachable shaft coupler program. This system allows you to change motors with no need to buy a particular pinion and press it on. In addition, the Ever-Ability uses the same pilot and bolt circle as the CIM, letting you run a Ever-Power everywhere a CIM engine mounts.
he Ever-Power includes a selection of options for installation. Each gearbox features four 10-32 threaded holes on top and bottom of its housing for easy area mounting. In addition, there are also holes on the front which allow face-mounting. Easily, these holes will be on a 2″ bolt circle; this can be a same as the CIM motor – everywhere you can mount a CIM-style motor, you can install a Ever-Power.
Other features include:
Six different planetary gear stages can be utilized to build up to 72 unique gear ratios, the the majority of virtually any COTS gearbox in FRC or perhaps FTC.
Adapts to a variety of FRC motors (Carrier, Mini CIM, RS-550, RS-775, 775pro, Redline, AM-9015, and CIM)
Adapts to a variety of FTC motors (AndyMark NeveRest, REV HD Hex Motor, Tetrix TorqueNADO)
ABEC-1/ISO 492 Class Usual Bearings, rated for 20,000+ RPM
AGMA-11 quality world and sun gears made from hardened 4140 steel
The Ever-Electricity v2 assembly is currently held as well as screws that install on the “back” (motor side) of the housing. This signifies that the gearbox can be disassembled to improve gearsets without getting rid of the gearbox productivity from the robot. Bosses have already been put into the sides of the gearbox and so when it’s side-attached you can “crank down” on the installation screws without accidentally misaligning a ring-gear stage. The v1 & v2 suggestions and output blocks can’t be blended and matched – A v2 input block can be used with a v2 output prevent. Ring gears and gear kits are compatible between v1 & v2
The base Ever-Power kits now include an optional pilot ring which will allow users to pilot the Ever-Power on a 0.75″ hole, rather than relying on screw clearances to locate the gearbox. The plastic motor mounting plates at this moment pilot on the type block.
Product Overview
Product Usage:
All Ever-Electricity gearboxes require grease for proper procedure and extended life. We recommend using our reddish colored tacky grease, am-2768. We also inspire that the user powers the gearbox continually for thirty minutes without grease to permit the apparatus teeth to don in. While we perform design and style with short run moments in mind, this ‘run in’ period for smooth gearbox operation, is recommended. Once that is completed, complete grease of the apparatus teeth periodically to make sure smooth operation.
One speed planetary gearbox, with the same installation and output interface as a 2.5″ CIM motor. Each planet gear has its bearing to spin openly on the carrier plate pins. A 2.5″ CIM Motor may also be used as the motor input, but requires this pinion equipment ( am-0556) and a CIM Spacer (am-0555).
Motor Input:
9015 motor fits on this gearbox
550 motor fits on this gearbox
2.5″ CIM Motor could be mounted, with a bored-out sun equipment and a spacer
Included Hardware:
Two – 8mm id ball bearings, (19mm od, 22mm od) supporting output shaft
One – Steel planet and sun gears, 32 dp, 20 level p.a.
Five – Planet gears (12 tooth)
One – 15 tooth sunshine equipment, with 0.125 inch bore
One – 40 tooth band gear
Performance Data:
(with the suggestions being truly a 9015 Fisher-Price motor)
Input voltage: 12 volts
Stall Torque: 1.12 ft-lb.
Free speed: approximately 4,000 rpm
Assembly Tip:
Install the metal plate to the face of the motor Ahead of pressing the pinion gear onto the motor shaft.
Specifications
Material: body is usually aluminum, shaft is 4140 steel
Mounting Holes: #10-32 tapped holes (2), upon a 2″ bolt circle to add at output shaft
Exterior dimension: 2.5 in.
Ratio: 3.67:1
Shaft Diameter: 0.313 inch,with 2mm keyway
Weight: 0.63 lbs
Product Features
Stainless steel 416 unique non-electrolysis nickle surface treatment
Integrated helical inner ring gear
Patented output sealing systems design
One piece world carrier with end result shaft design
Plasma nitriding
True helical gear design
Advanced gearing technology crowns lead of each gear tooth
Deep groove ball bearing
Lubricated with Nyogel 792D (Smart Grease)
With optional top quality backlash of < 1 arc-min
Planetary Gearbox with Output Shaft
Ever-Power planetary gearboxes with end result shaft are suited to a variety of drive solutions.
The output shaft is available in several variations, for example, when an output shaft with feather key for positive-fit and efficient power transmission. The feather key is a general connecting element within numerous drive elements and enables you to achieve an instant and secure interconnection between your planetary gearbox with productivity shaft as well as your application.
The planetary gearbox with smooth output shaft may be the ideal element for attaining a force-fit link with a coupling. This allows you to achieve maximum torque transmission even while in reverse mode.
You can also hook up the planetary gearbox with result shaft to your drive program with a toothed shaft. Using a toothed result shaft standardized to DIN 5480, it is very simple to perfectly fit additional drive pieces like a pinion with internal gearing.
The input flange of the planetary gearbox is individually adapted to the engine. The compact product of planetary gearbox with productivity shaft and servomotor improves your flexibility.
Due to rotating outcome shaft’s low inertia, planetary gearboxes with outcome shaft are the ideal solution for many dynamic applications. The adaptability of planetary gearboxes with productivity shaft gives you maximum flexibility to pick the right product for your application.
If, despite the compactness of our planetary gearboxes, you will need a straight shorter gearbox, you will discover a right position planetary gearbox with output shaft here.
INDUSTRIAL PLANETARY GEARBOXES
Complete selection of modular design planetary gearboxes for commercial applications. It combines powerful with low priced and compact size, remarkable reliability, simple set up and reduced protection. Brevini’s industrial planetary gearboxes come in a variety of sizes to make sure optimum period and silent running in all sorts of applications. These in-collection or right-angle planetary gearboxes can be found in male and female shaft configurations. The man shaft solution (splined or cylindrical) has the capacity to withstand good radial or axial loads on the productivity shaft.
Search
Go
HomeProductsGearboxesAxial Gearboxg700-P planetary gearbox
g700-P planetary gearboxes
Precision in the application.
The g700 planetary gearbox is a great solution for dynamic and cost-optimized applications.
Its high-level of reliability, long assistance life and excellent scalability generate it an accurate solution for demanding machine tasks.
Advantages:
For applications in which a medium backlash is required
High input speed likely: max. input speed 18,000 rpm
Wide transmission range: i=3 to 512 in 24 ratios
Wide torque range: 44.25 to 7081 lb-in (5 to 800 Nm) in five sizes
Lifetime lubrication for any mounting position
Can become combined with following motors:
With synchronous and asynchronous servo motors in the power range from 0.33 to 27 Hp (0.25 to 20.3 kW) 2212 to 17,9670 lb-in (250 to 20,300 Nm)
The Ever-Power Planetary Gearbox for Ability and Precision
vrs inlineFull electric power with the highest degrees of accuracy. The PlanetGear of Ever-Power has the necessary vitality reserves available for the most complicated power transmission requirements.
Advantages:
compact design
higher level of efficiency
high torsional rigidity
low mass moment of inertia torque
high overload capacity
high dynamics
large transmission ratios
Ever-Power offers innovative, customised gearbox solutions in a helical-toothed design. The look of the toothing is definitely carried out employing KISSsoft and our own design and calculation courses.
As well as the provision of tech support team and advice to your customers, we also take over the entire engineering procedure. By working closely as well as our customers, we assurance the development and development of the optimum drive solution in each case.