Material Managing Electrical power UNIT 2
Basic Description
This electrical power unit functions electrical power up gravity down circuit. Activate the commence solenoid to start out the motor to lift the machine. The lowing movement is activated from the solenoid valve with the lowering velocity controlled by the strain compensated flow handle valve. Merchandise of this series might be broadly used in the business of logistic units for instance fork lift, mini lift table, and so forth.
Unique Notes
one. The duty of this energy unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean each of the hydraulic elements concerned before mounting the electrical power unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst,which must also be clean and free of charge of impurities, N46 hydraulic oil is advised .
4. Oil changing is required immediately after the preliminary 100 operation hours,afterwards as soon as each and every 3000 hours.
five. The power unit need to be mounted horizontally.

Materials Dealing with Power UNIT one
Basic Description
This energy unit is made for that fork lift market, consisting of very efficient gear pump, DC motor, guide raise and decrease valve, tank, ect. The up and down movement are controlled by the lever in the manual release valve, that is outfitted with an electric switch to activate the motor. The lowing pace is controlled from the stress compensated flow manage valve.
Distinctive Notes
1. The duty of this electrical power unit is S3, i.e. 30 seconds on and 270 senconds off.
2. Clean each of the hydraulic parts concerned in advance of installation of the energy unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which should also be clean and free of charge of impurities, N46 hydraulic oil is proposed .
4. Oil changing is needed soon after the first a hundred operation hrs, afterwards after each and every 3000 hours.
five. The power unit shown is made to be mounted horizontally.