The EP Series Helical Bevel Reducer provides unmatched performance, durability, and style flexibility. This unit offers torque capacities up to 20,000 Nm (14,750 ft pounds).
The cat4CAD software allows simple interactive product collection of the complete gearbox and gear-engine system. Cat4CAD facilitates you in helical bevel gear reducer choosing and configuring the products, gives you the opportunity to print out considerable technical data linens, and generates complete 2D drawings and 3D versions for direct download.
11 sizes
Input power capacities from 0.16 to 120 HP
Gear ratios from 5:1 to 8900:1
Torque capacities to 20,000 Nm
Inverter duty class F insulated motor windings
Class 12 Helical and Spiral Bevel Gears: Provides higher efficiencies and better torques in smaller sizes.
Multiple Input Options: Integral gear motors, in . or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Options: Hollow bores and shrink disks for shaft mounting, inch and metric output shafts, installation pilots and flanges offer an array of design solutions.
UNIBLOCK Housing: For optimum rigidity, universal mounting on five sides or via a torque arm.
Worldwide Electric motor: Multiple leads and windings for worldwide multi volt/Hz requirements plus modular design to simply accept brakes, encoders or pressured cooling.
High efficiency motor design available
Innovative self-locking, self-aligning taper shaft engine connection
Gearbox supplied factory filled with synthetic oil
Corrosion and shock resistant cast iron housing
High efficiency helical-bevel gears. 98% per stage
Normally closed breather with multiple places (Optional OtN2000)
Double lip seals upon heat treated, plunge surface shafts
Shaft mounting choices include tapered bushings designs
This is a comprehensive offering of energy-efficient, right angle helical bevel enclosed gearing. It is obtainable as gearmotors and a variety of reducers with torque capacities up to 119,000 inch pounds. Housing designs include footed, encounter and flanged configurations. Gearmotors are available in three phase high efficiency designs through 50 HP and single phase to 5 HP. We provide a selection of input and output shaft choices. Additionally, you will see fixed and variable swiftness motors and selection of ratios obtainable in this product offering.
Features
Accommodates input power from ¼ Hp to 75Hp
Torque rankings up to 119,489 in-lbs
Decrease ratios up to 7,500:1
Helical – bevel – helical gear train offers affordable high and low speed solutions
Up to 94% efficient
Four input possibilities for all units
Two output flange options – B5 and B14
Multiple output shaft interfaces
Crucial dimensions interchangeable with main competitors
Modifications / Accessories
Integral Gearmotor
Clamp Collar C-Face Input
Solid Shaft Input
3-Piece Coupled C-Face Input
CEMA Screw Conveyor Adapter
EZ Kleen Washdown Package
XT Output Seals
Backstop
DURABLE Output Bearings
Inch or Metric Dimensions
Common Applications
Troughing Belt Conveyors
Slider Bed Conveyors
Mixer Drives
Screw Conveyors
Bucket Elevators
General Industrial Machinery
Common Industries
Aggregate and Cement
Air Handling
Chemical, Oil, and Gas
Food, Beverage, and Pharmaceutical
Paper and Forest
Unit and Baggage Handling
Water and Wastewater
As per the developing and varying needs of customers, we offer a wide range of Helical Bevel Equipment Reducers. The technological content material of our products permits an extraordinary functionality/lifespan ratio. The extremely versatile Helical Bevel Gear Reducers we offer are successfully used in a vast number of commercial and civil applications. These are B-Series units which offer excellent value for money and result torque/weight ratio, especially due to the fact they need not a lot of servicing. Besides these, our products can be found in cast iron (sizes 063 to 163) or aluminum (sizes A42 to A73) casing.
Features:
Sizes: 060-080-100-125-140-150-160
Available versions: B-fitted for engine coupling, IB with input shaft, CB with compact motor, PB-fitted for electric motor coupling with flexible joint
Casing with ft FC, flange SC and common UC
Power up to 90 kW
Gears hardened and tempered with shaved or floor profile
Gearing with 3 decrease stages
Gleason spiral bevel equipment pairs with run-in profile, mounted as second decrease stage for an increased resistance
Reduction ratios between 5, 71 and 187, 24
Torque max 13.000 Nm and admissible radial loads max 80.000 N
High-power casings optimized with FEM analysis and input and output flanges of grey cast-iron G200 to make sure best level performances and high reliability
Load capacity calculated and verified according to ISO 6336 and AGMA 2001
Painted with RAL 5010 blue epoxy-polyester powder
Accessories: torque arm, output flange, result shaft, shrink disk, backstop device, protection cover kit, viton essential oil seals, reinforced output, assemble/disassemble kit
Series EP right position helical bevel gear motors provide ratios from 8:1 to 160:1 in three levels or up to 10000:1 in five phases. Motors are available up to 90kW and output torque capability up to 12,300 Nm.
The series EP helical bevel gear motor is designed with integral cast feet for base or end mounting and will be offered with single or double extended output shafts.
Units are also available as shaft mounted or with output flanges and are designed for installation horizontally or vertically. The units can also be offered with a bolt on torque reaction bracket and all variants can be found possibly motorised or with an input shaft assembly.
Adding to the new selection of Ever-Power helical equipment motors this product takes advantage of our many years of accumulated design knowledge together with the use of top quality materials and elements. The outcome is a number of swiftness reducing geared motors providing high load carrying capacities, increased efficiency, noiseless running and reliability.
Top features of Helical Bevel Gear Motor
Standard motor connection
Capability to fit double essential oil seals, on insight and output shaft since required.
All units are dimensionally interchangeable with various other major manufacturers.
Units are manufactured and assembled from a family of modular kits for distributor friendliness minimizing inventory and maximizing availability.
Motorized units could be installed with a backstop module and reducer Units can be installed with a backstop and fan.
Applications:
-Conveyors, Agitators, Elevators, Cranes, Crushers
-Helical Bevel gear motors are found in industries such as chemicals, pharma, packaging, food processing, plastic and automation etc.
Key Features:
Sizes: A40-A50-A70
Offered versions: EP – fitted for electric motor coupling, IEP – with input shaft, CEP – with small motor
Cases with ft, flange or universal
Power up to 4,8 Kw
Gears with shaved or ground profile
Gearing with 2 and 3 reduction stages
Hypoid bevel gears for size A40 and A50, gleason bevel gear pairs for size A70, all with run-in profile
Reduction ratios between 7,62 and 442,76
Torque max 450 Nm and admissible radial loads max 5.500 N on hollow shaft and 10.000 N on solid shaft
Cases in die-cast aluminium alloy
Superb mechanical strength while being and particularly lightweight
Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88
Painted with RAL 5010 blue epoxy-polyester powder in according to DIN 1843
Accessories: torque arm, output flange, output shaft.
Generallntroduction of HK series:
Gear Reducer
The EP series gear units, are novel transmission device and made up of Y series electric motor, helical gear,Arc gear and worm gear. The gears are made of high wear-resisting alloy components, specifically and finely processed.
Advantages:
1: Helical-bevel equipment two-stage reducer
2: Compact structure, high efficiency
3: Quenched 20CrMnTi for gears
4: CE, ISO9001.
5: Compact design, small volume, great appearance ,and strong capacity of being overloaded.
6: Precise division and wide selection for transmission ratio.
7: The effectiveness is up to because high since 96% with low energy intake, strong adaptability and is capable of operating continually in corrosive or damp environment.
8: All- purpose make use of, convenient and low-cost maintenance.
9: New seal gadget, strong adaptability.
10: Varied range of motor combinations, mouting positions and struture projects.