The EP Greenhouse geared motor is a compact and lightweight reduction gear motor with a built-in limit switch system that’s ideal for assembly of a locally available electric electric motor. The gear reducer is utilized in manually-managed or climate-controlled ventilation and display systems in greenhouses. The quick and easy-to-install EP reducer is definitely rainproof and windproof. The gear motor includes a high protection class (IP65) and can be used within an ambient temperature of 0-60 °C.

The low-noise gear motor for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel tranny means that the drive shaft is definitely locked when the decrease gear reducer isn’t running. The completely sealed reduction gear motor comes with an expansion chamber with a diaphragm to keep the gear essential oil at a low pressure under all conditions, even at high temperature ranges. Thanks to the use of an growth chamber, the geared motor could be installed in any placement. There are no restrictions, because there is no dependence on a bleed plug. The sealed reduction gear motor keeps the gear oil of the reducer in optimum condition because of its entire operating life time. The geared motor is suitable for discontinuous use, working course s3-30%, with a maximum activation time of 25 minutes.

The Gear box reduction gear reducer comes with an FT85 motor assembly flange, to which the right IEC standard motor can easily be installed (EN 50347).

The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit change system is installed in an integrated chamber and is certainly enclosed by an impact-resistant plastic-type material cover. The limit switch system is obtainable and simple to adjust. The limit switch system’s maximum switching range can be 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The gear reducer comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The geared motor for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.

Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of app of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperature ranges of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 minutes.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC regular motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).