Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Surroundings Compressor diameter TPI fans. Made to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed electric fan motor china control switch. All the wiring in the middle of your electric motor, capacitor and quickness control change is still installed however the cord itself is normally detached as seen in the photos. (Discover “Control Notice” below for modify type.)
T (See “App Notice” below for make use of in various other applications.)
Dimensions: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft is½” (0.500″) diameter x 2 ½” long with a collection screw simple. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs appear to ‘ve got 4mm threads and also to be on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric motor) is Clockwise.

Control Take note: Motors will come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH versions in the images). These two types of switches both control the engine in the same way (but you possess a rotating knob and you have a pull-chain). If you order several electric motor at a time, we will do our better to supply your purchase with each one sort of control or the excess.
Application Note: USUALLY DO NOT use this electric electric motor in a nonfan software. This is a totally enclosed fan electric engine and made to have constant ventilation over the motor casing for cooling. The casing isn’t vented and the electric powered electric motor will overheat and enter automatic thermal overload if run in a nonfan program where there isn’t solid ventilation past the engine. (Caution Note: the electrical motor will restart instantly when it cools cool off.) Using this electrical motor for applications aside from 18 & 24″ TPI fans could also overload the engine and lead it to proceed into automated thermal overload. (Your lover blade from another producer may possess a steeper blade angle.)
Origin: This electric electric motor is manufactured in China.