DC MOTOR PUMP GROUP one
Basic Description
Consisting of the hefty duty DC motor and also the CB1S gear pump, this pump motor group is surely an great hydraulic electrical power unit for mobile hydraulic equipments, this kind of as motor vehicle carriers, mobile aerial lifts, and backup techniques.
DC MOTOR PUMP GROUP 2
Basic Description
This motor pump consists of 4.5″ DC motor, a CBSR gear pump with built-in relief valve and test valve.
DC MOTOR PUMP GROUP three
General Description
This motor pump includes a four.5″ DC motor and a CBSR gear pump that has a normal electrical power up/gravity down circuit by using a relief valve, a check out valve and a solenoid release valve.
Unique Notes
one. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean each of the hydraulic elements concerned before mounting the electrical power unit.
three. Viscosity with the hydraulic oil shoud be 15~68 cst, which should also be clean and free of impurities. N46 hydraulic oil is advised.
4. The energy unit needs to be mounted horizontally.
5. The relief valve stress is preset about 25% increased compared to the operating stress.
six. Flow control valve for lowing pace adjustment is available 
unpon request.
DC MOTOR PUMP GROUP
Tags: